Back to: MicroProbes

Tungsten Bipolar Electrodes, Blunted Tip

PrintShare
(MicroProbes)
Bipolar Electrode (Stereotrode)
Description

Tungsten is a versatile and widely-used microelectrode material that offers a good balance between performance and cost.

Advantages Disadvantages
  • Extremely strong and stiff metal provides probes with exceptional rigidity.
  • Great for acute and chronic recording due to biocompatibility and lower cost.
  • High corrosion resistance offers consistent long-term performance.
  • Does not provide the same degree of electrochemical performance or stability as platinum-iridium alloy, making it a poor alternative for microstimulation.
  • Lower charge transfer capacity of tungsten will result in larger, potentially unsafe interfacial potentials when applying the same stimulation current as to a platinum-iridium electrode.
  • Certain pH or stimulation conditions can lead to tungsten corrosion.

These bipolar microelectrodes of MicroProbes are also available in Platinum/Iridium and Elgiloy (an alloy similar to stainless steel). Each electrode is etched to a fine taper and tipped using a proprietary process to a specific impedance value. We offer a variety of different tip alternatives for those that prefer a specialized electrode profile for their research. There are four different tip profiles are also available to further fine-tune your electrode selection to your particular application. The tip selection can provide subtle yet important changes to the performance of the electrode, as described below. It is recommended that first time users consider experimenting with different tip profiles to determine which works best for their recording or stimulation protocols.

Stereotrodes are excellent for bipolar stimulation studies where the current injection needs to be confined to a small localized part of the neural tissue. They have also been used for enhanced isolation of single neural elements by simultaneous recordings of multiple units on two closely spaced microelectrodes. The tip spacing is typically equal to the diameter of the electrode shaft, however, they can be specified to greater separations in most instances.

As an alternative you may consider choosing monopolar electrodes with a thin Paryclene-C coating or with Polymide tubing for insulation, or concentric electrodes.

 

Stereotrodes (Bipolar Electrodes), Tungsten, Blunted Tip
(75 µm × 3")

Item

Length

Outside Diameter

Tip Separation

Impedance

Applications

Pkg of 10

WE3ST30.1B3

76 mm

0.216 mm

75 µm

0.1 MΩ

Multi Unit record. & Stim.

WE3ST30.5B3

76 mm

0.216 mm

75 µm

0.5 MΩ

Single & multiunit rec. & stim.

WE3ST31.0B3

76 mm

0.216 mm

75 µm

1.0 MΩ

Single & multiunit rec. & stim.

WE3ST31.5B3

76 mm

0.216 mm

75 µm

1.5 MΩ

Single & multiunit rec. & stim.

WE3ST32.0B3

76 mm

0.216 mm

75 µm

2.0 MΩ

Greater Selectivity & Micro. Stim.

WE3ST32.0B3

76 mm

0.216 mm

75 µm

2.0 MΩ

Greater Selectivity & Micro. Stim.

WE3ST32.5B3

76 mm

0.216 mm

75 µm

2.5 MΩ

Greater Selectivity & Micro. Stim.

WE3ST33.0B3

76 mm

0.216 mm

75 µm

3.0 MΩ

Greater Selectivity & Micro. Stim.

 

Stereotrodes (Bipolar Electrodes), Tungsten, Blunted Tip
(125 µm × 3")

Item

Length

Outside Diameter

Tip Separation

Impedance

Applications

Pkg of 10

WE3ST30.1B5

76 mm

0.356 mm

125 µm

0.1 MΩ

Multi Unit record. & Stim.

WE3ST30.5B5

76 mm

0.356 mm

125 µm

0.5 MΩ

Single & multiunit rec. & stim.

WE3ST31.0B5

76 mm

0.356 mm

125 µm

1.0 MΩ

Single & multiunit rec. & stim.

WE3ST31.5B5

76 mm

0.356 mm

125 µm

1.5 MΩ

Single & multiunit rec. & stim.

WE3ST32.0B5

76 mm

0.356 mm

125 µm

2.0 MΩ

Greater Selectivity & Micro. Stim.

 

Stereotrodes (Bipolar Electrodes), Tungsten, Blunted Tip
(125 µm × 5")

Item

Length

Outside Diameter

Tip Separation

Impedance

Applications

Pkg of 10

WE5ST30.1B5

127 mm

0.356 mm

125 µm

0.1 MΩ

Multi Unit record. & Stim.

WE5ST30.5B5

127 mm

0.356 mm

125 µm

0.5 MΩ

Single & multiunit rec. & stim.

WE5ST31.0B5

127 mm

0.356 mm

125 µm

1.0 MΩ

Single & multiunit rec. & stim.

WE5ST31.5B5

127 mm

0.356 mm

125 µm

1.5 MΩ

Single & multiunit rec. & stim.

WE5ST32.0B5

127 mm

0.356 mm

125 µm

2.0 MΩ

Greater Selectivity & Micro. Stim.

 

Stereotrodes (Bipolar Electrodes), Tungsten, Blunted Tip
(250 µm × 3")

Item

Length

Outside Diameter

Tip Separation

Impedance

Applications

Pkg of 10

WE3ST30.1B10

76 mm

0.610 mm

250 µm

0.1 MΩ

Multi Unit record. & Stim.

WE3ST30.5B10

76 mm

0.610 mm

250 µm

0.5 MΩ

Single & multiunit rec. & stim.

WE3ST31.0B10

76 mm

0.610 mm

250 µm

1.0 MΩ

Single & multiunit rec. & stim.

WE3ST31.5B10

76 mm

0.610 mm

250 µm

1.5 MΩ

Single & multiunit rec. & stim.

WE3ST32.0B10

76 mm

0.610 mm

250 µm

2.0 MΩ

Greater Selectivity & Micro. Stim.

 

Stereotrodes (Bipolar Electrodes), Tungsten, Blunted Tip
(250 µm × 5")

Item

Length

Outside Diameter

Tip Separation

Impedance

Applications

Pkg of 10

WE5ST30.1B10

127 mm

0.610 mm

250 µm

0.1 MΩ

Multi Unit record. & Stim.

WE5ST30.5B10

127 mm

0.610 mm

250 µm

0.5 MΩ

Single & multiunit rec. & stim.

WE5ST31.0B10

127 mm

0.610 mm

250 µm

1.0 MΩ

Multi Unit record. & Stim.

 

 

Common Tip Profiles:

Schematic of Standard Tip
A - STANDARD TIP PROFILE
The standard tip profile features a sharp yet robust point that offers versatile performance and an effective balance between penetration and durability.
Schematic of Blunted Tip
B - BLUNTED TIP PROFILE
The blunted electrodes are engineered to have a more rounded, bullet-shaped tip. For many applications the blunted tip can offer superior stimulation performance.
Schematic of Heat Treated Tapered Tip
H - HEAT TREATED TAPERED TIP PROFILE
The heat-treated electrodes are intended for those investigators who must penetrate their probes through tough membranes, such as the dura mater of larger mammals.
Schematic of Extra Fine Tip
F - EXTRA FINE TIP PROFILE
The extra-fine tip profile features a significantly sharper taper as well as a thinner insulation layer.

 

Also see:

<a href="/en/sel-microprobes