This dual in-line solution heater/cooler extends the temperature range for controlled perfusion studies of both coverslip mounted cells and anchored tissue thin slices.
- Heats or cools perfusate*
- Compatible with all Warner Series 20 chambers
- Requires a CL-100 Bipolar Temperature Controller
- Versatile and simple to use thermal control device
*Users should recall that saturation levels for many ionic compounds decrease at lower temperatures.
In-line solution heating has proven to be one of the most effective methods of maintaining the temperature of perfusion solutions. The SC-20 Dual In-line Solution Heater/Cooler utilizes Peltier thermoelectric technology to regulate temperature both above and below ambient levels.
The SC-20 is designed to thermally regulate one or two solutions at the same temperature. Temperature regulation is provided by the CL-100 Bipolar Temperature controller. Solution temperatures can be maintained at 0 °C at flow rates of 2 mL/min., 5 °C at 5 mL/min., or as high as 50 °C at 5 mL/min.
An integral water jacket is used to remove excess heat from the SC-20. Running water from a tap or large reservoir can be used as a source. Flow rates as low as 1 gallon per hour is sufficient to maintain efficient cooling.
The SC-20 can be used with either one or two discrete perfusate solutions, or with a solution/gas combination. When coupled with a PHC Series Imaging Chamber Heater/Cooler Jacket, the SC-20 provides an effective means of temperature control in the chamber, even under slow-flow conditions.
Each heater/cooler is supplied with a TA-29 Thermistor Cable Assembly for monitoring the bath temperature.
Minimum Temperature 0 °C at 2 ml/min maximum flow
Maximum Temperature 50 °C
Maximum Flow Rate at 5 °C 5 ml/min
Accuracy ± 0.1 °C
Internal Dead Volume 330 µl
Controller Model CL-100 Bipolar Controller
Perfusion Lines Type 316 Stainless Steel 0.032 ID × 0.062 OD
Water Jacket Ports Type 316 Stainless Steel 0.12 ID × 0.147 OD
Body Physical Dimensions 21 mm diameter × 165 mm long
Weight 109 g
Cable Length 1.9 m
Connector Type 15 pin Male D
Warranty One Year